Delorme pn-20 Manual Do Utilizador

Página de 98
5
Power
Use the Power button to turn the Earthmate GPS PN-20 on and off, to change the backlight settings, 
or to reset the Earthmate GPS PN-20:
•  To turn the Earthmate GPS PN-20 on, press and hold the Power button for 1.5 seconds.
•  To  turn  the  Earthmate  GPS  PN-20  off,  press  the  Power  button.  When  you  see  the  “Press  
  ENTER to power down” message, press the ENTER button to confirm that you want to turn  
  off the Earthmate GPS PN-20. If you do not want to turn the Earthmate GPS PN-20 off, wait five  
  seconds or press the QUIT button.
•  To change the backlight intensity percentage, press and hold the Power button (for approxi- 
  mately  two  seconds  if  the  device  is  powered  on)  until  you  see  the  backlight  screen  display.  
  Press the arrow keypad to the left to move the slider and decrease the backlight intensity. Press  
  the arrow keypad to the right to move the slider and increase the backlight intensity. Each level  
  of intensity represents a 10% interval (100% is the maximum backlight intensity, 10% is the  
  minimum backlight intensity).
•  To turn the backlight off, press and hold the Power button for three seconds (while the device is  
  powered on) until the backlight shuts off.
Note: The backlight turns on any time you presss a button unless you turned it off using the 
Device Setup menu. For more information, see the To Modify the Display Settings section on 
page 67.
•  When you charge the Earthmate GPS PN-20, the backlight intensity is automatically reduced to  
  decrease charging time.
•  To reset the Earthmate GPS PN-20 when it is on, press and hold the Power button for seven  
  seconds.
Step 4 — Transferring Map Data to the Earthmate GPS PN-20
Your Earthmate GPS PN-20 comes equipped with an overview-level base map showing world and 
U.S. coverage. While this provides a great view of a large area, chances are that you will want a 
detailed view of a smaller area for hiking, geocaching, and other activities. You can transfer more 
detailed maps to the Earthmate GPS PN-20 using:
•  Compatible DeLorme Mapping Software—Instructions for sending maps to your Earthmate  
Getting Started
Tip:  Decrease  the  backlight
timer to help conserve battery
life.
Press ENTER to confirm that
you want to turn the device off