Delorme pn-20 Manual Do Utilizador

69

 

Notes: 

•  Mac and Linux users should always select one of the Mass Storage options for the USB  

  setting (depending on if you are saving data on internal or removable memory). 
•  If you want to access the files on your SD card and you do not have an SD card reader, select  

  Mass Storage: SD/MMC Card as the USB setting.
•  Select DeLorme if you are using the device with compatible DeLorme mapping software.

3.  Press QUIT to return to the Device Setup Page.

Use the following instructions to modify the device’s button press sound, message sound, power 

sound, turn alert sound, and/or the volume of all sounds.

1.  From the Device Setup Page, highlight the Sound option and press ENTER.
2.  To  modify  the  button  press  sound,  highlight  the  Button  Press  drop-down  list  and  press  

 

ENTER. Highlight the sound type you want and press ENTER.

3.  To modify the message sound, highlight the Message drop-down list and press ENTER. Then,  

 

highlight the sound type you want and press ENTER.

4.  To  modify  the  Power  sound,  highlight  the  Power  drop-down  list  and  press  ENTER.  Then,  

 

highlight the sound type you want and press ENTER.

5.  To  modify  the  turn  alert  sound,  highlight  the  Turn  Alert  drop-down  list  and  press  ENTER.  

 

Then, highlight the sound type you want and press ENTER.

6.  To modify the volume of all sounds, highlight the Volume slider control and press the arrow  

 

keypad to the right to increase the volume (or to the left to decrease the volume).

7.  To  mute  the  sound,  highlight  the  Mute  field  and  press  ENTER.  Note:  This  does  not  mute  

 

the warning sound when power is critically low. To enable sound again when the check box is  

 

selected, highlight the Mute field and press ENTER to clear the check box.

8.  Press QUIT to return to the Device Setup Page.