Vermont Castings lhe20cslb Manual Do Utilizador

Installation Instructions

installation.
These instructions cover the assembly of Models 

LHE20CSLB and LHE30CSLB cast iron surrounds for 

use on the LHE20 and LHE30 model fireplace inserts.

Compare contents of carton in Figure 2 with actual 

parts received. If any parts are missing, or damaged, 

contact your dealer before starting installation.
Surround Parts:
1.  Right column

2.  Mantel

3.  Left column

4.  Lower bracket (2)

5.  Upper bracket (2)

6.  Switch housing (1)

7.  Hex head bolt, 1/4” -20 x 3/8” (4)

8.  Phillips pan head bolt, 1/4” x 3/8” (7)

9.  Washers, 7/8” (4)

The assembly includes three (3) cast iron surround 

panels, four (4) sheet steel brackets, a switch housing 

and hardware. The switch housing is for use with ʻCʼ 

series fireboxes. It can be installed on either side of the 

surround.
Install the Model LHECSLB surround after all other 

installation work has been completed, thoroughly 

checked, and tested for proper operation, leaks and 

installation requirements. 

KT393

Cast iron surround

5/19/03   djt

KT393

Fig. 1  Front view of surround assembly.

Tools required: 
Phillips screwdriver

7/16” wrench

Lay out the parts, face down, on a flat padded surface. 

(Fig. 2)
1.  Align the holes in the top flanges of the left and right 

columns with the drilled and tapped bosses onto the 

left and right ends of the mantel.

2.  Attach the mantel to the columns with four (4) 1/4”-

20 hex bolts and washers.

3.  Only one upper bracket is used per surround. De-

termine which bracket is correct for the insert and 

discard the other. (Fig. 3) Attach the upper bracket 

to the mantel with two (2) phillips pan head bolts 3/8” 

long. (Fig. 2) 

30001946  8/08  Rev. 6

4

4

2

5

8

8

1

8

6

7

9

9

8

7

3

KT394

Assemble 

surround

5/19/03   djt

KT394

Fig. 2  Back view of surround assembly.