Vermont Castings lhe30cslb Manual Do Utilizador

Attaching the Surround

1. For ʻCʼ series units, attach the switch wires to

the valve. The wires attach to the ʻTH/TPʼ and the

ʻTHʼ terminals (the top and bottom terminals) on

the valve. Bring the wires to the side of the ﬁrebox.

If the switch housing is on the left side of the sur-

round, bring the wires to the left side of the ﬁrebox.

Bring the wires up through the bottom of the switch

housing, and out through the side. (Fig. 4) Attach the

wires to the switch by pressing the wire connectors

onto the prongs of the switch. Press-ﬁt the switch

into the housing. (Fig. 4)

2. Position surround in front of ﬁreplace insert and,

with the help of an assistant, gently lift the surround

up and over the top ﬂange and right and left side

ﬂanges. Secure surround by applying downward

pressure until the lower brackets have engaged onto

the left and right side ﬂanges. (Fig. 5)

3. This completes the assembly.

KT396

attach surround

5/19/03 djt

Top Flange

Left

Side

Flange

Right

Side

Flange

KT396

Fig. 5 Attach the cast surround to the ﬁreplace insert.

Lift surround up and

over top ﬂange. Apply

downward pressure.

4. Attach the two (2) lower brackets to the bottoms of

the columns with two (2) 3/8” phillips pan head bolts

each. (Fig. 2) NOTE: When positioning the right

column lower bracket, make sure one of the hooked

ﬂanges is in the upper right hand corner and facing

towards you. The other hooked ﬂange will be in the

opposite lower corner and facing away from you.

(Fig. 2)

The left column lower bracket is the opposite.

5. For ʻCʼ series units, choose which side of the sur-

round should have the ON/OFF switch, and attach

the switch housing to the back of that column with

one (1) 1/4-20 x 3/8” phillips pan head screw. (Fig. 4)

KT398

Upper bracket

side view

5/20/03 djt

Deeper Set

Back

LHER20

LHER30

LHEC20

LHEC30

KT398

Fig. 3 Determine which bracket is correct for the installation.

KT395

Attach

switch housing

5/19/03 djt

Upper Bracket

Switch

Housing

Switch

Connectors

Switch Wires

KT395

Fig. 4 (ʻCʼ Series units only) Attach the switch housing and

the switch. The housing can be attached to either column.

MHSC

149 Cleveland Drive • Paris, Kentucky 40361