Kenwood KRF-V5080D Manual Do Utilizador

Página de 32
22
 EN
ENGLISH
Listening to radio broadcasts
Presetting RDS stations 
(RDS AUTO MEMORY)
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS AUTO MEMORY function.
INPUT SELECTOR
BAND
AUTO
MEMORY
1
Use the INPUT SELECTOR knob to select the tuner.
2
Use the BAND key to set the broadcast band to “FM”.
3
Press and hold the MEMORY key for more than 2 seconds.
• After a few minutes, up to 40 RDS stations are preset in order from
channel “01”.
• Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15
RDS stations, the stations currently preset at numbers 01~15 will
be replaced by the RDS stations.)
Under certain receiving conditions, it may take more than 1
minute to complete the search.
“NO PROG” is displayed if this operation is attempted before
performing the RDS Auto Memory operation.
Tuning by Program TYpe 
(PTY search)
This function lets you set the tuner to automatically search for stations
which are currently broadcasting the type of program (genre) you want
to listen to.
MULTI 
CONTROL
TUNING
¡
PTY
Preparations
• Execute the RDS auto memory procedure.
• Set the broadcast band to FM.
• Tune to an RDS station.
Program type table
Program Type Name
Display
Pop Music
POP M
Rock Music
ROCK M
Easy Music
EASY M
Light Classical Music
LIGHT M
Serious Classical Music
CLASSICS
Other Music
OTHER M
News
NEWS
Current Affairs
AFFAIRS
Information
INFO
Sport
SPORT
Education
EDUCATE
Drama
DRAMA
Culture
CULTURE
Science
SCIENCE
Varied Speech
VARIED
Program Type Name
Display
Weather
WEATHER
Finance
FINANCE
Children’s Program
CHILDREN
Social Affairs
SOCIAL
Religion
RELIGION
Phone In
PHONE IN
Travel
TRAVEL
Leisure
LEISURE
Jazz Music
JAZZ
Country Music
COUNTRY
National Music
NATION M
Oldies Music
OLDIES
Folk Music
FOLK M
Documentary
DOCUMENT
1
Press the PTY key to activate the PTY search mode.
When an RDS broadcast is received, the program type is shown on
the display.  If no PTY data is available, or if the station is not an RDS
station, “NONE” is displayed.
2
While the “PTY” indicator is lit, use the MULTI CONTROL
knob or MULTI CONTROL 
% keys, or TUNING 1 / ¡
keys to select the program type of your choice.
Goes out
3
Press the PTY key to start searching.
EXAMPLE : Searching for a Rock Music broadcast.
Display while searching.
Blinks
Program type name display
Display when a station is received.
Station name display
No sound is heard while “PTY” is blinking.
If the desired program type cannot be found, “NO PROG” is
displayed, then after several seconds the display returns to the
original display.
To select another program type
Repeat steps 
12 and 3.
*5451/14-22/EN
04.1.22, 4:15 PM
22