Juniper Networks T1600 Manual Do Utilizador
■
Custom 10-ft (3.05-m) posilock SMB to BNC male cable, separate Rx and Tx (provided)
Cables and connectors
One tricolor per port:
■
Off—Not enabled
■
Green—Online with no alarms or failures
■
Amber—Online with alarms for remote failures
■
Red—Active with a local alarm; router has detected a failure
LEDs
■
Alarm indication signal (AIS)
■
Bit error rate test (BERT) functionality on PIC (you can configure one DS3 channel in
BERT mode and configure the remaining channels to transmit and receive normal traffic)
BERT mode and configure the remaining channels to transmit and receive normal traffic)
■
Equipment failure (does not affect service)
■
Far-end block error (FEBE)
■
Frame error
■
Idle code, Idle received
■
Local and remote loopback
■
Loss of signal (LOS)
■
Out of frame (OOF)
■
Parity bit (P-bit) disagreements
■
Path parity error
■
Yellow alarm bit (X-bit) disagreements
Alarms, errors, and
events
events
DS3 PIC
■
39
DS3 PIC