Honeywell MS-9200UDLSE Manual Do Utilizador

Product Description

MS-9200UDLS   PN 52750:A    11/04/05

13

• Telephone Line Active LEDs 
• Communication Confirmation (Kissoff) LED
• Touchtone/Rotary dialing
• Programmable Make/Break Ratio
• EIA-232 Printer/PC interface (variable baud rate)
• 80-character LCD display (backlit)
• Real-time clock/calendar with daylight savings time control
• History file with 1,000 event capacity
• Advanced fire technology features:

Automatic drift compensation
Maintenance alert
Detector sensitivity test capability (NFPA 72 compliant)
Automatic device type-code verification
Point trouble identification

• Waterflow selection per module point
• Alarm verification selection per detector point
• Walktest, silent or audible
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
• Silence inhibit timer option per NAC
• Autosilence timer option per NAC
• Continuous, March Time, Temporal or California code for main circuit board 

NACs with two-stage capability

• Selectable strobe synchronization per NAC
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules, 

AFM annunciators or LCD-80F Remote annunciator

• Auto-program (learn mode) reduces installation time.  Reports two devices set to 

the same address

• Password and key-protected nonvolatile memory
• User programmable password
• Fully programmable from local keypad or optional keyboard
• Upload/Download (local or remote) of program and data via integral DACT
• Compatible with Fire-Lite’s newer series devices (refer to SLC Wiring Manual 

for a list of compatible addressable devices)

• Compatible with legacy Fire-Lite 300 Series devices in CLIP mode only (refer to 

the SLC Wiring Manual for a list of compatible addressable devices)

• Optional 4XTMF module (conventional reverse polarity/city box transmitter)
• Annunciators:

ACS Series-LED Zone Annunciators
LDM Graphic Annunciator Series
LCD-80F Liquid Crystal Display point annunciator
ACM-8RF Relay Module

Refer to Illustration on page 10 for terminal locations and connections.
AC Power - TB11
MS-9200UDLS: 120 VAC, 60 Hz, 3.0 amps

MS-9200UDLSE: 240 VAC, 50 Hz, 1.5 amps
Wire size: minimum 14 AWG (2.00 mm

2

) with 600 V insulation