Honeywell MS-9200UDLSE Manual Do Utilizador

Remote Site Upload/Download

158

MS-9200UDLS   PN 52750:A    11/04/05

Remote Site Upload/Download

The control panel may be programmed or interrogated off-site via the public switched 
telephone network.  Any personal computer with Windows

™

 95 or greater, with a 14.4 

Kbaud compatible modem and Upload/Download software kit P/N PK-CD, may serve 
as a Service Terminal.  This allows download of the entire program or upload of the 
entire program, history file, walktest data, current status, system voltages, time and 
date.

CAUTION: After successfully downloading a program, make certain to perform the 
following steps:

1. Print out all programmed data via Print Mode or manually view programmed 

entries and compare to intended program data

2. Test all affected panel operations

3. Immediately correct any problems found

The first time that the control panel is downloaded (whether initiated at the jobsite or 
remotely), a secret code is loaded in by a Service Terminal.  Future upload or download 
requests cause verification of the secret code by the control panel before processing of 
data is allowed.  If the secret code is not verified, the control panel will terminate the 
request.

While the control panel is communicating with the Service Terminal, one of the 
DACT’s red phone line active LEDs will remain on steady.  At the conclusion of a 
successful download, the green Kissoff LED will turn on steady for five seconds and the 
red phone line active LED will turn off.

In order to download the panel (whether initiated at the jobsite or remotely), the 
following must be true:

The control panel must be in the Normal Mode of operation.  Downloading is 
not possible if the panel is in any other mode
There cannot be any active communications ongoing with a Central Station 
receiver
All active events must be successfully 'kissed-off' by the Central Station(s).  
The communicator must be in a standby state with no new information waiting 
to be transmitted to a Central Station

Two basic communication mechanisms are supported as follows:

• Download with callback - the Service Terminal calls the control panel.  The 

control panel answers the call, confirms the calling party then hangs up.  The 
Service Terminal then waits for a callback from the control panel.  After the 
control panel calls the Central Station and successfully reports that a request for 
downloading has been received, the control panel calls the Service Terminal 
back.  Upon secret code verification, data transfers occur.  When the data 
transfers are completed and the Service Terminal disconnects from the control 
panel, the panel calls the Central Station back to confirm either successful or 
unsuccessful results.

• Download with callback disabled - the Service Terminal calls the control panel.  

No hang-up sequence occurs.  Data transfers proceed.