Honeywell MS-9200UDLSE Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

51

The following examples show the editing of a photoelectric smoke detector with 
address 017, located on the SLC loop:

To Enable or Disable the detector, press the 1 key while viewing the Edit Detector 
Screen #2.  Each press of the key will toggle the screen between Enabled Yes and 
Enabled No.  If Enabled No is selected, the detector will not be polled by the control 
panel, preventing the detector from reporting alarms and troubles to the panel.  The 
control panel will display the device type and address which has been disabled and 
will turn on the Trouble LED and Disable LED.

EDIT DETECTOR 1D017
1=ENABLED        YES
2=TYPE  SMOKE(PHOTO)
3=VERIFICATION   OFF

EDIT DETECTOR 1D017
1=WALKTEST        NO
2=PAS             NO
3=PRE-SIGNAL      NO

EDIT DETECTOR 1D017
1=ZONE ASSIGNMENT
    00 ** ** ** **

EDIT DETECTOR 1D017
1=NOUN/ADJECTIVE
2=DESCRIPTION
********************

EDIT DETECTOR
1=ENABLED
2=TYPE
3=VERIFICATION

Edit Detector Screen #2