Honeywell MS-9200UDLSE Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

77

Pressing 1 for Zones Installed, while viewing Zone Setup Screen #2, will display a 
screen similar to the following: 

This display will show all of the zones that have been programmed into the control 
panel.  Note that an up and/or down arrow may appear in the upper right corner of 
the display, indicating that additional screens of zone information exists.  Press the 
up or down arrow keys to view the additional zones.

Pressing 2 for Zones Enabled, while viewing Zone Setup Screen #2, will display a 
screen similar to the following: 

This display will show all of the zones that are enabled in the control panel.  Note 
that an up and/or down arrow may appear in the upper right corner of the display, 
indicating that additional screens of zone information exists.  Press the up or down 
arrow keys to view the additional zones.

Pressing 3 for Zones Disabled, while viewing Zone Setup Screen #2, will display a 
screen similar to the following: 

This display will show all of the zones that are disabled in the control panel.  Note 
that an up and/or down arrow may appear in the upper right corner of the display, 
indicating that additional screens of zone information exists.  Press the up or down 
arrow keys to view the additional zones.

    ZONE SETUP
1=ZONES INSTALLED
2=ZONES ENABLED
3=ZONES DISABLED

Zone Setup Screen #2

  ZONES INSTALLED
00 01 02 03 04 05 

  ZONES ENABLED
00 01 02 04 05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21

  ZONES DISABLED
03