Honeywell MS-9200UDLS Manual Do Utilizador

Programming

48

MS-9200UDLS   PN 52750:A    11/04/05

The Point Program option allows the programmer to add a new addressable device to an 
SLC loop, delete an existing device from a loop or change the programming for an 
existing device.  Pressing 2, while viewing Programming Screen #1, will select the 
Point Program option and display the following screen:  

Pressing 1, while viewing the Point Program Screen, will allow the programmer to 
add, delete or change the programming of an addressable detector.  The following 
screen will be displayed by the control panel: 

3.6.2.1.1  Add Detector
Pressing 1 while viewing the Detector Screen will display the following screen 
which allows the programmer to add a new detector address to programming: 

A flashing cursor will appear in the position of the first asterisk to the left.  The 
programmer keys in the three digit detector address, such as 005.  

When the last digit is keyed-in, the following screen will be displayed:

Press the down arrow key to view additional choices.  Press the number 
corresponding to the desired selection to program that type to the newly added 
detector.

PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP

Programming Screen #1

   POINT PROGRAM
    SELECT TYPE
1=DETECTOR
2=MODULE

      DETECTOR
1=ADD
2=DELETE
3=EDIT

    ADD DETECTOR
ENTER DETECTOR#
***

    DETECTOR TYPE
1=SMOKE(PHOTO)
2=USER-DEFINED-1
3=SMOKE(ION)