Honeywell MS-9200UDLS Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

75

Pressing 3 while viewing Programming Screen #2 will access the Zone Setup screens as 
illustrated below: 

Pressing 1 for Enable, while viewing Zone Setup Screen #1, will display the 
following screen: 

This screens allows the programmer to enable zones, one at a time.  A flashing 
cursor appears next to the Z, prompting the programmer to enter a two digit zone 
number (01 - 99).  When the second digit is entered, the zone will be enabled and 
the cursor returns to the original position next to the Z.  Another zone can then be 
enabled.

    PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP

Programming Screen #2

    ZONE SETUP
1=ENABLE
2=DISABLE
3=ZONE 97 98 99

    ZONE SETUP
1=ZONES INSTALLED
2=ZONES ENABLED
3=ZONES DISABLED

    ZONE SETUP
1=ZONE TYPES
2=ZONES AVAILABLE

    ZONE SETUP
1=ENABLE
2=DISABLE
3=ZONE 97 98 99

Zone Setup Screen #1

  ZONE TO ENABLE
Z