Honeywell MS-9200UDLS Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

89

3.6.5.5.4  Auto Silence
The Auto Silence feature, when enabled, automatically silences all main circuit 
board silenceable notification appliances after a programmed length of time.  To 
enable this feature and program the time delay before Auto Silence activation, press 
1 while viewing NAC Screen #2.  The following screens will be displayed:

To disable the Auto Silence feature, press 1 for No while viewing Auto Silence 
Screen #1.  To enable the Auto Silence feature, press the number corresponding to 
the time delay which will elapse before Auto Silence activates.  This information 
will be stored in memory and the display will return to NAC Screen #2.
Note:  All silenceable control modules as well as the remote power supply sync will 
be controlled by the Autosilence timer for NAC 1.

3.6.5.5.5  Coding (only for NACs not programmed as Sync Strobe Type)
The Coding feature allows the programmer to select the type of output that the main 
circuit board notification appliances will generate when activated.  Pressing 2 while 
viewing NAC Screen #2 will cause the following displays to appear:

   NAC #
1=AUTO SILENCE
2=CODING
          TEMPORAL

NAC Screen #2

  AUTO SILENCE
1=NO
2=5 MINUTES
3=10 MINUTES

  AUTO SILENCE
1=30 MINUTES

  AUTO SILENCE
1=15 MINUTES
2=20 MINUTES
3=25 MINUTES

     CODING
1=STEADY
2=MARCH TIME
3=CALIFORNIA

     CODING
1=TEMPORAL
2=TWO STAGE 3 MIN
3=TWO STAGE 5 MIN