Honeywell MS-9600UDLSE Manual Do Utilizador

144

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

Programming

To change the date, press 2 while viewing the Time and Date Screen.  The following screen will be 
displayed:

A flashing cursor will appear on the left side of the display.  Enter the two digit month, two digit 
day and four digit year.  The cursor will move one position to the right after each entry.  When the 
fourth digit of the year has been entered, the display will return to the Time and Date Screen which 
will show the new date.

Pressing 3 while viewing Maintenance Screen #2 will display the following screen: 

     ENTER DATE

MONTH DAY YEAR

01-01-2010

    PROGRAMMING

1=WALKTEST

2=SYSTEM

3=ZONE SETUP

Maintenance Screen #2

    ZONE SETUP

1=ENABLE

2=DISABLE

3=ZONE 97 98 99

    ZONE SETUP

1=ZONES INSTALLED

2=ZONES ENABLED

3=ZONES DISABLED

    ZONE SETUP

1=ZONE TYPES

2=ZONES AVAILABLE

3=ZONE MESSAGE