Honeywell MS-9600UDLSE Manual Do Utilizador

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

147

Programming

Pressing 3 for Zones Disabled, while viewing Zone Setup Screen #2, will display a screen similar 
to the following: 

This display will show all of the zones that are disabled in the control panel.  Note that an up and/or 
down arrow may appear in the upper right corner of the display, indicating that additional screens 
of zone information exists.  Press the up or down arrow keys to view the additional zones.

Zone Types must be programmed only if a DACT, programmed for zone reporting, is installed on 
the control panel.  Pressing 1 for Zone Types, while viewing Zone Setup Screen #3, will display a 
screen similar to the following: 

This display will show the system zones (default and user programmed) and their associated types.  
Note that an up and/or down arrow will appear in the upper right corner of the display, indicating 
that additional screens of zone information exists.  Press the up or down arrow keys to view zones 
Z00 through Z99.

  ZONES DISABLED

03 

    ZONE SETUP

1=ZONE TYPES

2=ZONES AVAILABLE

3=ZONE MESSAGE

Zone Setup Screen #3

  ZONE TYPE PROG

1=Z00  MONITOR

2=Z01  MONITOR

3=Z02  MONITOR