Honeywell MS-9600LSE Manual Do Utilizador
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
171
Read Status
Operating Instructions
4.22.15 Print
To print program data or control panel status, press 3 while viewing Read Status Screen #5. The
following screens will be displayed:
following screens will be displayed:
Pressing 1 while viewing Print Screen #1 allows the user to print the History file which will detail
all of the system activities since the file was last cleared from memory.
all of the system activities since the file was last cleared from memory.
Pressing 2 while viewing Print Screen #1 allows the user to print the Walktest log which will detail
all of the system activations during walktest since the log was last cleared. Refer to “Walktest” on
page 160 for additional information on the display.
all of the system activations during walktest since the log was last cleared. Refer to “Walktest” on
page 160 for additional information on the display.
Pressing 3 while viewing Print Screen #1 allows the user to print the detector data for each address-
able smoke detector connected to the system. A printout, similar to the following example, will be
generated if an optional printer is connected to the FACP.
able smoke detector connected to the system. A printout, similar to the following example, will be
generated if an optional printer is connected to the FACP.
Chamber Value
The Chamber value should be within the indicated range for the following smoke detectors:
•
SD350(T), SD355(T), D350P(R), SD300(T), AD350 and AD355 Addressable Photoelectric
Smoke Detectors: 405 - 2100 (obscuration of 1.00%/ft to 3.66%/ft.)
Smoke Detectors: 405 - 2100 (obscuration of 1.00%/ft to 3.66%/ft.)
•
CP350, CP355 and CP300 Addressable Ionization Smoke Detectors: 750 - 2100 (obscuration
of 0.50%/ft. to 1.44%/ft.)
of 0.50%/ft. to 1.44%/ft.)
If the addressable smoke detector’s Chamber reading is not within the acceptable range, clean the
detector and check the Chamber value again. If the reading is still not within the acceptable range,
immediately replace the detector.
detector and check the Chamber value again. If the reading is still not within the acceptable range,
immediately replace the detector.
READ STATUS
1=SERVICE TERMINAL
2=PRINTER/PC
3=PRINT
Read Status Screen #5
PRINT
1=HISTORY
2=WALKTEST LOG
3=DETECTOR DATA
PRINT
1=EXIT PRINTING
Print Screen #2
Print Screen #1
DEVICE #
DEVICE TYPE
%DRIFT COMP
CHAMBER
TIME/DATE
1D001
SMOKE (PHOTO)
20
1281
12:01AM 01-08-2001
1D002
SMOKE (PHOTO)
20
1281
12:01AM 01-08-2001
1D003
SMOKE (PHOTO)
21
1259
12:01AM 01-08-2001
1D004
SMOKE (PHOTO)
20
1309
12:02AM 01-08-2001
1D005
SMOKE (PHOTO)
21
1281
12:02AM 01-08-2001
1D006
SMOKE (PHOTO)
20
1322
12:02AM 01-08-2001
1D007
SMOKE (PHOTO)
20
1280
12:02AM 01-08-2001
1D008
SMOKE (PHOTO)
20
1215
12:02AM 01-08-2001
1D009
SMOKE (PHOTO)
20
1310
12:02AM 01-08-2001