Honeywell MS-9600LSE Manual Do Utilizador

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

65

Programming

When the Master Program Level password is entered, the control panel will enter user Program-
ming mode.  In this mode, the piezo sounder remains off, the trouble relay is activated and the sys-
tem Trouble LED flashes until Programming mode is exited.  The following display will appear: 

The down arrow which appears in the display indicates that additional programming choices can be 
viewed by pressing the down arrow key on the keypad.  If a down and up arrow appear in the dis-
play, pressing the ‘down’ arrow key will display the subsequent Programming Screens as illustrated 
below while pressing the ‘up’ arrow key will display the previous screen.

 

    PROGRAMMING

1=AUTOPROGRAM

2=POINT PROGRAM

3=ZONE SETUP

    PROGRAMMING

1=LOOP SETUP

2=SYSTEM SETUP

3=VERIFY LOOPS

    PROGRAMMING

1=HISTORY

2=WALKTEST

3=OPTION MODULES

    PROGRAMMING

1=PASSWORD CHANGE

2=CLEAR PROGRAM

3=PROGRAM CHECK