Honeywell 800-05056 Manual Do Utilizador
Operation
Document 800-05056
Rev C
77
11/09
Note
With some computers, the image drawing speed might decrease
when the Anti-Aliasing Screen option is selected.
when the Anti-Aliasing Screen option is selected.
Panic Recording
Clicking
on the toolbar starts panic recording of cameras currently displayed on the
Watch screen. Clicking the button again stops panic recording. Up to 16 channels can
be recorded at a time, and you can select which cameras are to be recorded during the
System setup. Clicking
be recorded at a time, and you can select which cameras are to be recorded during the
System setup. Clicking
on the toolbar initiates the Record Player program and plays
video saved in the recording folder designated during the System setup. The Record
Player GUI and its controls are almost identical to the Clip Player. Refer to
Player GUI and its controls are almost identical to the Clip Player. Refer to
If you want to play back video saved in another recording folder, run the Record Player
program first. Move to the Start menu in Windows. Then, select Record Player from the
RASplus options and select the recording folder path you want.
program first. Move to the Start menu in Windows. Then, select Record Player from the
RASplus options and select the recording folder path you want.
Recorded video can be saved in a bitmap or as an executable file using the save
function of the Record Player.
function of the Record Player.
Note
Panic recording will be available only if you select the Use
Recording check box in the recording options during the
System setup.
Recording check box in the recording options during the
System setup.
Note
The date and time displayed on the Record Player indicates
when the recording was made on RASplus.
when the recording was made on RASplus.
Note
The
icon will display on each screen when panic recording
starts.