Haier xqs70-98 Manual Do Utilizador

Inner cover shaft

Outer tub cover
shaft groove

Outer tub cover

Inner cover

After opening the package, please lean
the washing machine gently down on
soft items (like towel cloth, blanket, etc.). 
Install the bottom plate to the bottom 
of the machine with eight screws by a 
c r o s s   s c r e w d r i v e r ,  t h e n   l i f t   t h e
machine up gently. See to the figure:

The largest allowed slope of the shank base of the machine is 2

. The slanting or rough ground will result in

 unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal 

Hang the plumb  to confirm it's 

horizontal

Adjust the adjustable foot

(1)  To twist the adjustable foot at the right front of 
       the cabinet (front the sight of front), please first
       lift up the side of the foot slightly, loosen the 
       adjustable nut, and twist the foot.

(2)   Fasten the nut after adjustment.

Loosen

Fasten

High

Low

adjustable nut

adjustable foot

Please  install and adjust the machine according to the requirement of  the manual. 
It  is very  important  to your security  and  correct operating  the machine.

1.Open the top lid of the washing machine.
2.Put the inner cover  component on the  outer  tub  cover,  aiming
the inner cover shaft to the  installation hole of the  corresponding
outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of 

I side into the correspon

-ding outer tub cover shaft groove, then push the another inner
 cover shaft into the corresponding outer tub cover shaft groove. 
Please install to  designated position to guarantee there are no 
 dropping or  abnormal sound in opening and closing of the inner 
cover,  and the operation  shall be smooth. Do not dismount the
 inner cover component after washing.

Soft items

Back

Screw

Front

Bottom plate

4