Haier xqs70-98 Manual Do Utilizador

1.

Do not take off the water absorption cushion. Please check if the

 cushion is dropped or damaged before each usage. If it happens 
please contact our after-sale department immediately.

1.

Swing the hose gently to confirm if it is fastened stable.

2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.

1.

Push down the slider. Insert the water inlet hose into the jointer.

2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.

Locking level 

Slider

water absorption cushion.

nut of the water inlet hose

the jointer of the water inlet hose

Slider

Locking level

jointer of the water inlet valve

1.

 Close the water faucet.

2. Press the locking lever. Push down the slider. Then pull of the water inlet hose. 
    If the machine is used frequently, the jointer of the water inlet hose can be kept
    on the faucet to prevent damaging the fixing screw.

2 Put the nut of the water inlet hose on the valve jointer.

3 Fasten the nut. Swing it gently to confirm if it's suitable.

4.Before each usage please check if the connection 
   between the jointer of the water inlet hose and the 
   water faucet, and the installation of the water inlet 
   hose are firm, so as to prevent dropping from
   improper installation position.

use the new hose sets supplied with the washer.

                   Any other old hose sets should not be used.

7