Lincoln Electric SVM187-A Manual Do Utilizador

BLOWER

PADDLE/ARMATURE

MOUNTING BOLTS (8)

BLOWER PADDLE

ROPE SLING

1.  Turn off the engine

2.  Perform 

the 

3.  Perform 

the 

4.  Perform 

the

5.  Using the rope sling, support the armature.  Position

the sling at the center of gravity of the armature
assembly.  See Figure F.32

6.  Remove the eight screws securing the blower pad-

dle segments and the outer diameter of the flexible
coupling disk to the flywheel.

7.  With the armature securely supported in the sling,

unlock it from the flywheel by carefully rotating it 1/8
of a turn in either direction.

1.  Carefully inspect the mating surfaces of the fly-

wheel and armature coupling parts.  These surfaces
must be clean and undamaged.

2.  Support the armature in a rope sling and carefully

move it into position, and align it to the flywheel.

3.  Rotate the armature 1/8 of a turn, in either direction,

to engage the locking mechanism and line up the
bolt holes.  Be certain that the coupling plate is fully
and cleanly seated in the flywheel.

4.  Replace the eight screws and four blower seg-

ments. Tighten the screws per the torque specifica-
tion sheet.

5.  Perform  the  Generator Frame Replacement

6.  Perform  the  Alternator Stator Replacement

7.  Perform  the  Alternator Rotor Replacement