Honeywell av8or Manual Do Utilizador

AV8OR User’s Guide                         Automotive Mode Operation 
 

Pub. No D200803000008         Page 4-60     Revision July 2008. 

© Honeywell International Inc. Do not copy without express permission of 

saved, but if it needs to be recalculated, the current TMC 
information will be used in the new route.  

•  If you updated your map since you first saved the route, Go 

Drive recognizes the change, and recalculates the driving 
instructions according to the latest available map information.  

 
•  Go Drive deletes from the route the via points that you already 

left behind during navigation together with the road segments 
used to reach it. To avoid this, if you want to save the route, you 
need to save it before you start navigating.  

 

 
This feature is available in Advanced mode only.  
The procedure is explained starting from the Map screen.  

 

 
1.   Tap the following soft Keys:  
 
2.   Tap the route you wish to navigate.  
 
3.   In the very likely case when the start position of the saved route 
is different from the current GPS position, you need to confirm 
whether you want to stop navigating from the current GPS position to 
use the start point of the loaded route.  
 

•  If you choose this option, the automatic off-route 

recalculation will be disabled.  

•  If you choose to keep the current GPS position as the start 

point, the route will be recalculated starting from your current 
position.  

 
4.   The map appears, and you can start navigating.