Kenwood TK-5910 Manual Do Utilizador

38

■

  You can set the transceiver to automatically respond to Individual Calls (while 

using FleetSync):
1  Press the key programmed as Auto Reply Message to enter Auto Reply 

Message mode.

•  The auto reply message indicator (KCH-4: 

/  

KCH-5: 

) appears when this function is activated.

 2  When you receive an Individual Call, Auto Reply will begin after waiting for 

3 seconds, the transceiver will send an automatic response to the caller, 

and “GREETING” appears on the display.

•  If you are available to receive the call, press any key to disable the auto 

response.

•  If there is a channel available on your transceiver for recording, “I am not 

available. Leave your Message.” will be sent to the caller.  The caller can then 

leave a recorded message on your transceiver which you can later recall and 

listen to.  When a message is stored on your transceiver, “n Msg Rcvd” (where n 

is the number of new messages received) appears on the display. 

•  If there is no channel available on your transceiver for recording, “I am not 

available.” will be sent to the caller and “MEMORY FULL” appears on the display.

■

  To play back a recorded conversation, memo, or message:

1  Press the key programmed as Playback to enter Playback mode.

•  If the last action on your transceiver was to auto record your conversation, 

“STORE?” will appear on the display, otherwise a memory channel with the 

time of the recording will appear.  To store the conversation record in the next 

available memory channel, press the 

PF 4 key.  To skip to the stored memory 

channels, press the 

PF 2 or DTMF

key.  To skip back 5 seconds, press the 

GRP 

 key.  To skip ahead 5 seconds, press the 

 key.

2  Rotate the CH control or press the GRP 

 and 

 keys to select the 

memory channel you want to play back.

•  “RM” represents automated reply messages.
•  “AR” represents conversation records.
•  “VM” represents voice memos.

3  The transceiver will announce the channel, then the recording will 

automatically play back.

•  When the entire recording has been played, “END OF MSG” (end of message) is 

displayed.

•  To delete the selected recording, press the 

PF 3 or DTMF # key.  To clear all 

the recorded data, press and hold the 

PF 3 or DTMF # key.  A confirmation 

message will appear on the display.  Press the 

PF 2 or DTMF

key to delete the 

recording(s) or the 

PF 3 or DTMF # key to cancel.

When changing the zone and/or channel, an audio voice will announce the new 

zone and channel number.  Additionally, when changing a function setting, an audio 

voice will announce the new setting.  (Voice announcements vary by dealer setting.)