Furuno fmd-811 Manual Do Utilizador
14
1.20 The Navigation Data
Display
Display
Navigation data can be displayed at the
screen bottom if the unit receives naviga-
tion input in NMEA 0183 format. Naviga-
tion data include
screen bottom if the unit receives naviga-
tion input in NMEA 0183 format. Naviga-
tion data include
• position in latitude and longitude or Lo-
ran-C time differences (TDs)
• bearing and range to a waypoint selected
on the navigator
• cross track error (XTE—the amount in
nautical miles and the direction the ves-
sel if off course)
sel if off course)
• depth
• speed.
• speed.
If the navigation data include the destina-
tion data, waypoint position is denoted on
the screen by a dashed ring.
tion data, waypoint position is denoted on
the screen by a dashed ring.
1.5
NM
0.5
HDG 326.8°
66° 04. 00N
166° 04. 00E
VRM EBL + CURSOR
0.675
NM
240.1°
R
0.646
NM
308.7°
R
DEPTH XTE SPD
350.0m 0.05NML 30.0KT
WAYPOINT POSI L/L
12.0
NM
45.0°
M
AUTO
Figure 1-17 Sample nav data display
Setting up the nav data display
1) Press the [MENU] key.
2) Select Nav Data and press the [ENT] key.
NAV DATA MENU
Select item and option
by
by
▲▼
keys.
1. Navigator
2. Nav Data Disp
3. Pos Disp Mode
4. Depth Unit
5. Temp Unit
6. STBY Display
2. Nav Data Disp
3. Pos Disp Mode
4. Depth Unit
5. Temp Unit
6. STBY Display
. . . . . . . . . . . . . . . . .
Press HM-OFF to temporarily
hide menu.
hide menu.
<Press MENU for main menu.>
ALL GPS LC
OFF ON
L/L TD
M FA FT
°C °F
NORM NAV
OFF ON
L/L TD
M FA FT
°C °F
NORM NAV
Figure 1-18 Nav data menu
3) Select Navigator; GPS, Loran C or ALL
(Select all if several navigators are con-
nected to the unit. In this case, position
data is selected in order of GPS, Loran C
and other.)
nected to the unit. In this case, position
data is selected in order of GPS, Loran C
and other.)
4) Select Nav Data Disp to OFF or ON.
5) Select Pos Disp Mode to L/L (latitude and
longitude or TD (Loran C).
6) Select unit of depth measurement to
meters, fathoms, or feet.
7) Select unit of measurement for water tem-
perature to Centigrade or Fahrenheit.
8) Select whether to display nav data or "ST-
BY". "NORM" for stand-by; NAV for
navigation data.
navigation data.
9) Press the [ENT] key followed by the
[MENU] key.
1.21 Echo Stretch (magnifying
long range echoes)
long range echoes)
Normally, the reflected echoes from long
range targets appear on the display as weaker
and smaller blips even though they are com-
pensated by the internal circuitry. To stretch
long range echoes, in the range direction,
turn on the echo stretch function.
range targets appear on the display as weaker
and smaller blips even though they are com-
pensated by the internal circuitry. To stretch
long range echoes, in the range direction,
turn on the echo stretch function.