Kodak drhd-120 Manual Do Utilizador
Connection
13
Connection
• RF OUT, is labeled TO TV, is signal pass-thru only.
• A S-Video cable is not supplied.
• A S-Video cable is not supplied.
NOTE
Connection for Video Output Terminals
Composite Video (CVBS) Output
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite.
Connect “Front L” and “Front R” to AUDIO INPUT (L/R) on TV and set “Analog Output” to “ Stereo” from the
AUDIO SETUP menu.
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite.
Connect “Front L” and “Front R” to AUDIO INPUT (L/R) on TV and set “Analog Output” to “ Stereo” from the
AUDIO SETUP menu.
EURO AV Output
The Euro AV terminal can be connected to the TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.
The Euro AV terminal can be connected to the TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be
green, blue, red. The component video provides the best picture.
Set “Video Output” to “YCrCb On” from VIDEO SETUP menu.
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be
green, blue, red. The component video provides the best picture.
Set “Video Output” to “YCrCb On” from VIDEO SETUP menu.