Kenwood TS-590S Manual Do Utilizador
8 EXPANSIVE APPLICATION SOFTWARE
54
TS-590S
Caution: When the USB connector is used for input/output of the audio signal on the host station, ARUA-10 is not required
neither.
ARCP-590 (Amateur Radio Control Program for TS-590S) is software enabling control of the TS-590S
from a PC.
from a PC.
Figure 8-1 Main Window of ARCP-590
ARCP-590 is available free and can be downloaded from Kenwood’s website.
URLs from which ARCP-590 can be downloaded:
URLs from which ARCP-590 can be downloaded:
As with ARCP-480 for the TS-480S, the new ARCP-590 program is designed to control virtually all of
the functions on the TS-590S transceiver.
the functions on the TS-590S transceiver.
8.2.5 Controlling TS-590S from a PC on a Remote Site
Remote Station (PC that remotely
controls the transceiver)
Type of
Connection
Host station (PC that is located
near the TS-590S)
Software
Hardware
Software
Hardware
Control signal
ARCP-590
-
Network
ARHP-590
* Connected to
the COM or USB
connector
the COM or USB
connector
Audio signal
ARVP-10R or
generic VoIP
software
The microphone
and speaker
connected to a
PC
ARVP-10H or
generic VoIP
software
generic VoIP
software
* Connected to
the ACC2 or USB
connector
the ACC2 or USB
connector
8.3 New ARCP-590 (Amateur Radio Control Program for
TS-590S) Freeware