KitchenAid KICU465S Manual Do Utilizador

KICU465S

120-volt, 60-Hz, AC-only, 15-amp.

electrical supply. Use copper wire only. A time-
delay fuse or circuit breaker and separate circuit is
recommended.

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.

Ref. W10094880B

02-07-08

®

1 — 90° elbow 

=  5  ft. (1.5 m)

8 ft. (2.4 m) straight  =  8  ft. (2.4 m)
1 — wall cap 

=  0  ft. (0 m)

system length 

=13  ft. (3.9 m)

To calculate the length of the system
you need, add the equivalent feet
(meters) for each vent piece used in
the system.

45° elbow

2.5 feet

(0.8 m)

90° elbow

5.0 feet

(1.5 m)

The hood chimneys are adjustable

and designed to meet varying ceiling or
soffit heights depending on the distance
“X” between the bottom of the hood and
the cooking surface. For higher ceilings, a
40” (101.6 cm) Chimney Extension Kit Part
Number 8212698 (Black), Kit Part Number
8212696 (Stainless Steel) or Kit Part Number
8212697 (White) is available. See your
dealer. The chimney extension replaces the
upper chimney shipped with the hood.

Important:
Minimum distance “X”: 24” (61.0 cm)
Suggested maximum distance “X”: 
30” (76.2 cm)

For vented installations, the chimney can be
adjusted for ceilings between 7’ 7-1/8” 
(2.31 m) and 9’ 1-3/4” (2.79 m).

For non-vented (recirculating) installations,
the chimney can be adjusted for ceilings
between 8’ 3-3/8” (2.52 m) and 9’ 5-1/4”
(2.88 m).

As hood height (distance X) increases,
hood's venting effectiveness decreases.