Kenwood KDC-PS9018R Manual Do Utilizador

You can turn the non-fading output on and off.

Press the NF button for at least one second to set the function
ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.

Shut down the audio system temporarily whenever an
incoming call is received.

TEL mute will not work if a wire is not connected to a car phone.

When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.

Press the SRC (source) button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.

Hang up the phone.
"CALL" disappears from the display.
The original source (the one used before the phone call) is
returned to automatically, and the volume restored gradually.

Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to
the type of subwoofers.

Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.

Press the Q button to enter the speaker setting mode.

Each time you press the FM/AM button, the mode switches as
follows:

•In speaker setting mode

Press either the 

4 or ¢ button to select the type of

speaker. The setting switches as follows.

Off ( "Speaker Setting OFF" ) / 
For 6/6x9 in. speaker ( "Speaker Setting 6

*

9/6 inch" ) /

For 5/4 in. speaker ( "Speaker Setting 5/4 inch" )/
For the OEM speaker ( "Speaker Setting O.E.M.") 

• In woofer setting mode

Press either the 

4 or ¢ button to select the type of Sub

woofer. The setting switches as follows.

"Woofer OFF" / "12in type A" / "10in type A" / "12in type B" /
"10in type B" / "12in type C" / "10in type C" / "8inch" / "12in
type D" / "10in type D"

Press the Q button to end the speaker setting mode and
woofer setting mode.

• Speaker setting function allows for tuning of bass, middle and

treble.

• Woofer setting allows for tuing of high-pass filter frequency,

low-pass filter frequency and non-fading level. 

Speaker setting mode 

Woofer setting mode 

 

— 14 —

KDC-PS9018R(M_E)_r3  2003.06.13  03:04 PM  Page 14