Kenwood KDC-PS9018R Manual Do Utilizador

You can dim the display. 

The dimmer function is not available for units if the dimmer wire
is not connected.

"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

You can change the font used on the display.

Select the display "Font Select" during the selecting function in
the menu system.
Pressing the 

4 or ¢ button switches the font on the

display.

This function permits switching of the spectrum analyzer
display.

Select the display "Icon/Speana Select" during the selecting
function in the menu system.
Pressing the 

4 or ¢ button switches the Icon/Spectrum

analyzer.

You can select the display mode of this unit.

"Display Type A" : Divide the display into the upper and lower

parts to separately provide different
information. (Vertical division display) (page
10) (Default setting)

"Display Type B" : The display will turn on by using only the

upper part of the display and clock.

"Display Type C" : Use the entire display to provide a single

type of information. (Full screen display)
(page 9)

You can switch the color of the button illumination between
green and red.

"Button Color Green" : The color of the illumination is green.
"Button Color Red" : The color of the illumination is red.

The time adjusts automatically to the correct local time.

The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.

— 35 —

KDC-PS9018R(M_E)_r3  2003.06.13  03:04 PM  Page 35