Kenwood KDC-PS9018R Manual Do Utilizador

This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up when the loudness function is
on.

Press the LOUD button for at least one second to switch the
loudness on and off.

The loudness function does not affect non-fading pre-out.

• The external disc control mode will differ depending on the unit

that is connected.

• To enable the selection of External disc control mode 2/AUX

mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
During the AUX mode, "AUX" (or AUX-name display) will show
in the display. When the CA-C1AX is being used, the AUX
Mode will replace the External Disc Control Mode.

Selecting AUX-name display

Pressing the DISP button for at least two seconds during the
AUX mode, AUX-name display is blinked for AUX-name selection
mode. 
Pressing 

4 or ¢ button during this mode allows you to select

"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.
The AUX-name selection mode can be exited by pressing the
DISP button or doing nothing for 10 seconds. 

Each time you press the SRC (source) button, the mode
switches as follows:

Press the SRC button repeatedly and switch to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is activated.
The standby mode turns all functions off while leaving the
power to the unit on. Use this mode when you want to have
the display illuminated but don't want to listen to anything.

• The mode switches to the next mode from any mode which

cannot be used.

▼

Tuner mode

▼

CD mode

▼

External disc control mode 1

▼

External disc control mode 2 / AUX mode

▼

Standby mode

This function allows you to turn down the volume quickly.

Press the ATT button to switch the attenuator on and off.
When the attenuator is off, the volume returns to the original
level.

Turning the volume up, or turning it all the way down deactivates
the attenuator function.

— 8 —

KDC-PS9018R(M_E)_r3  2003.06.13  03:04 PM  Page 8