Kenwood TM-281E Manual Do Utilizador

50

This transceiver provides you with 10 dedicated DTMF 
Memory Channels.  You can store a DTMF number (16 
digits max.) in each of these channels to recall later for 
speed dialing.

Many repeaters in the U.S.A. and Canada offer a service 
called Autopatch.  You can access the public telephone 
network via such a repeater by sending DTMF tones.  For 
further information, consult your local repeater reference.

The keys on the Mic keypad function as DTMF keys; 
the 12 keys found on a push-button telephone plus 4 
additional keys (A, B, C, D).

To perform Manual Dialing, follow the steps below.

1  Press and hold Mic [PTT] to transmit.

2  While transmitting, press the keys in sequence on the 

keypad, to send the DTMF tones.

•  The corresponding DTMF tones are transmitted.

1

2

3

A

4

5

6

B

7

8

9

C

0

#

D

•  When DTMF TX Hold is activated {page 51}, you do 

not need to continuously press Mic [PTT] to remain 
in transmission mode.  However, transmission mode 
is retained for only 2 seconds after pressing a key, so 
if the next key is not pressed within this time limit, the 
transceiver stops transmitting.

When pressing the Mic DTMF keys, you will not hear 
DTMF tones emitted from the speaker.  However, you 
can monitor the DTMF tones if desired.

1 Press 

[F], [MENU] and turn the Tuning control to 

select Menu No. 33 (DT.M).

2 Press 

[MENU] and turn the Tuning control to select 

“ON” or “OFF” (default).

3 Press 

[MENU] to store the setting or any other key to 

cancel.

4  Press any key other than [MENU] to exit Menu Mode.