Kenwood dvf-5400 Manual Do Utilizador
P
repar
a
tions
12
English
INPUT
DIGITAL INPUT
AUDIO
VIDEO
R
L
COAXIAL
OPTICAL
Connecting to a TV with Component input terminal
Connecting to a TV with Component input terminal
Audio cord
Rear panel example (for Europe)
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:
Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo
system, using the audio cords.
system, using the audio cords.
Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™ or
DTS):
DTS):
Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL/OPTICAL) to the corresponding in jack on your amplifier. Use a digital (co-
axial/optical) cable. Select "Bitstream" if you connect the DVD player to an amplifier or other equipment with a multi-channel decoder.
(See page 17.)
axial/optical) cable. Select "Bitstream" if you connect the DVD player to an amplifier or other equipment with a multi-channel decoder.
(See page 17.)
Component cords (Commercially
available)
available)
Video cord
TV
Connecting to an Audio component
Connecting to an Audio component
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital connection.
Refer to "TV Output Select (only for Europe)" on page 17.
Rear panel example (for Europe)
Video cable or Component cords
(Commercially available)
(Commercially available)
TV
Notes:
• In case an associated system component is connected, also read the instruction manual of the component.
• If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted
• In case an associated system component is connected, also read the instruction manual of the component.
• If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted
sound or no sound at all.
DTS disclaimer clause
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to
the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an
amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digi-
tal output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an
amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digi-
tal output (S/P DIF, AES/EBU, or TosLink) of the DVD player.
Audio cord
Coaxial cable
Optical cable
AV receiver or AV Amplifier
Connections
5400_EN.indd 12
07.3.29 14:06:1