Xerox Pro 385 Manual Do Utilizador
Reception Modes
4-7
4
After receiving documents, the machine displays MEMORY RECEIVED
and the cause. For example, NO PAPER.
and the cause. For example, NO PAPER.
When the condition is cleared, for example by loading new paper or
clearing a jam, the machine will automatically print the fax stored in
memory.
clearing a jam, the machine will automatically print the fax stored in
memory.
If you clear the problem while the machine is receiving documents into
memory, it will print the stored document immediately upon clearing the
problem.
memory, it will print the stored document immediately upon clearing the
problem.
Receiving a Fax Printed Too Light to Read
If the toner level in the Laser Printer Cartridge is low or empty, you may
receive a fax which is printed too light to read. Fortunately, the machine
stores the last 10 pages of received fax data, continuously updating the
pages whenever a fax is received. This feature is always enabled to prevent
loss of fax data due to low or empty toner. Follow the procedures below to
print the Last Fax Data or to erase Last Fax Data from memory.
receive a fax which is printed too light to read. Fortunately, the machine
stores the last 10 pages of received fax data, continuously updating the
pages whenever a fax is received. This feature is always enabled to prevent
loss of fax data due to low or empty toner. Follow the procedures below to
print the Last Fax Data or to erase Last Fax Data from memory.
Printing Last Fax Data:
1
Press the Menu button, then press the System Setup button on the
One-Touch keypad.
One-Touch keypad.
The display shows RINGER VOLUME ?.
2
Press the Up or Down button until the display shows LAST FAX
DATA REPRINT ?.
DATA REPRINT ?.
3
Press Enter.
4
The LED display screen shown below appears.
LAST FAX DATA
1:PRINT 2:CLEAR