Xerox 685 Manual Do Utilizador

Troubleshooting

16-2

WorkCentre Pro 665/685/765/785

Key test - Press

then

. You will be asked to press all

the keys on the control panel and then press the Stop key at the

end of the test. You will receive an OK prompt if the test is

successful.

LED test - Press

then

. This test will turn on all the

control panel LEDs.

LCD test - Press

then

. When you run this test please

check that all the sections in the LCD are turned ON and then

turned OFF. You will be prompted to confirm that the test was

successfully completed.

Speaker test - Press

then

. You will be prompted to

select the various speaker volumes available and confirm that the
test was successful.

Switch test - Press

then

. During this test you will be

prompted to open and close the scanner cover, open and close

the machine top cover, pull out and push in the paper tray,

remove and replace the process unit, load the bypass tray with

paper and use the flip door.

Test print - Press

then

. When selected the machine

will print out a test document which can be checked for print

quality. This test uses the main paper cassette and does not pick

up the paper in the bypass cassette.

To print out a Self Test Report displaying the status of the Auto

test and the Individual tests, press

When you have completed the required Self Test, press

Exit or

Stop to return to the Standby Mode.