Konica Minolta bizhub c30p Manual Do Utilizador
Selecting Driver Options/Defaults (for Windows)
13
Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows XP/Server 2003/2000/NT 4.0
1
Choose the driver’s properties as follows:
–
(Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C30P PCL6 or KONICA MINOLTA bizhub C30P PS printer
icon and choose Properties.
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C30P PCL6 or KONICA MINOLTA bizhub C30P PS printer
icon and choose Properties.
–
(Windows 2000/NT 4.0)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Properties.
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Properties.
–
PostScript printer driver for Windows NT 4.0 is not supported.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
to step 9.
3
Select the Configure tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
"
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
available with the printer; otherwise it is grayed out.
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
select Enable or Disable from the Settings menu.
"
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
"
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.