National Instruments NI PCIe-8255R Manual Do Utilizador
NI PCIe-8255R Quick Start Guide
The NI PCIe-8255R is an IEEE 1394a
1
and IEEE 1394b interface device
for PCI Express (PCIe) with reconfigurable I/O (RIO). This document
explains how to install and configure the NI 8255R.
explains how to install and configure the NI 8255R.
What You Need to Get Started
You need the following items to set up and use the NI 8255R:
❑
NI Vision Acquisition Software 8.2 or later
❑
NI Vision Acquisition Software Release Notes
❑
Computer running Windows 2000/XP with at least one PCIe slot
❑
IEEE 1394 camera
❑
9-pin IEEE 1394 cable for interfacing to IEEE 1394b cameras
❑
6-pin to 9-pin cable or 6-pin to 9-pin adapter for interfacing to
IEEE 1394a cameras
IEEE 1394a cameras
❑
External power supply to support powering isolated outputs
❑
Optional software packages and documentation:
–
NI Vision Development Module
–
NI Vision Builder for Automated Inspection
–
LabVIEW
–
LabVIEW FPGA Module
–
LabWindows
™
/CVI
™
1
To connect an IEEE 1394a camera to the NI 8255R, you will need a 6-pin to 9-pin cable or a 6-pin to 9-pin adapter.