Chaney Instrument model 00883 digital thermometer Manual Do Utilizador
00883
Digital Thermometer with Probe
LAKE GENEVA, WI 53147
www.chaneyinstrument.com
Any Chaney instrument which proves
to be defective in material or
workmanship within one year of
original purchase will be repaired or
replaced. This warranty does not
cover damage in shipment or failure
caused by tampering, carelessness
or abuse.
LIMITED WARRANTY
OPERATING INSTRUCTIONS:
1. Slide the battery door open and insert (1) “AAA” battery
as indicated.
2. For normal display conditions, the upper screen will display
indoor temperature readout as detected by the built-in sensor
and the lower screen will display outside temperature
readout as detected by the outside remote sensor wire.
and the lower screen will display outside temperature
readout as detected by the outside remote sensor wire.
3. Slide conversion switch on back side of unit to
°F for
Fahrenheit temperature readout or
°C for Celsius
temperature readout.
4. Press the MIN/MAX button once to display the maximum &
minimum indoor temperature readout. Press the MIN/MAX button twice to display the maximum
& minimum outdoor temp. readout. Press the MIN/MAX button 3 times to return to the current
temperature readout.
& minimum outdoor temp. readout. Press the MIN/MAX button 3 times to return to the current
temperature readout.
5. If you press clear after pushing the MIN/MAX button once, you will erase the maximum &
minimum indoor temp. stored in memory. If you press clear after pushing the MIN/MAX button
twice, you will erase the maximum & minimum outdoor temperature stored in memory.
twice, you will erase the maximum & minimum outdoor temperature stored in memory.
6. Pressing the LIGHT button will provide illumination.
INSTALLATION INSTRUCTIONS
THE UNIT:
Choose a suitable space away from direct sunlight, heating and air conditioning vents.
Option 1: Install wall mount bracket with enclosed 2 screws or double-sided tape. Hang unit on
THE UNIT:
Choose a suitable space away from direct sunlight, heating and air conditioning vents.
Option 1: Install wall mount bracket with enclosed 2 screws or double-sided tape. Hang unit on
mounted bracket.
Option 2: Use flip-down stand to display on flat surface.
THE OUTSIDE SENSOR:
Make sure that the remote sensor wire will reach outside before mounting the unit. Remove the
protective paper from sensor, press firmly in position free from direct sunlight and rain. Avoid direct
sunlight and heavy saturation. For auto, an ideal position is behind the front bumper, not diredtly in
wind stream. Avoid engine or aradiator heat.
Make sure that the remote sensor wire will reach outside before mounting the unit. Remove the
protective paper from sensor, press firmly in position free from direct sunlight and rain. Avoid direct
sunlight and heavy saturation. For auto, an ideal position is behind the front bumper, not diredtly in
wind stream. Avoid engine or aradiator heat.