culligan ct-2 Manual Do Utilizador

Replacement Parts

Replacement Filter Cartridges:
• CT-2R Filter Cartridge for CT-2 Filter (155158)

Filter Parts:
1. Top of Housing
2. Replacement Filter Cartridge

(see “Replacement Cartridges”above)

3. Gasket (143340)*
4. Base of Filter Housing
5. DV-2 Diverter Valve / Aerator (158408)*
6. Adapters (144249)*

* Available replacement parts.

Please contact Culligan Consumer
Services at 1-888-777-7962.

Suggested Retail Price for Replacement Filter Cartridges: 
CT-2R: $20.00

NOTE: Price subject to change. Contact your local retailer or call: 1-888-777-7962
for current replacement cartridge pricing. 

Performance Data

Important Notice: Read this performance data and compare the capabilities of
this system with your actual water treatment needs.  It is recommended that,
before installing a water treatment system, you have your water supply tested to
determine your actual water treatment needs.
This system has been tested according to NSF/ANSI 42 and 53 for the reduction of
the substances listed below. The concentration of the indicated substances in water
entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.

Substance

Influent Challenge 

Max. Permissible Product

Reduction

Minimum

Average

Concentration

Water Concentration

Requirements

Reduction

Reduction

Standard 42 Aesthetic Effects
Chlorine

2.0 mg/L±10%

≥ 50%

97%

Particulates (0.5– at least 10,000

≥ 85%

96%

<1µm) Class I

particles/mL

Standard 53 Health Effects
Cysts†

Minimum 50,000/L

99.95% 

99.99%

99.99%

Turbidity

11 mg/L±1 NTU

0.5 NTU

95.4%

97.4%

Asbestos

10

7

to 10

8

fibers/L>10

99%

99.9%

99.9%

micrometers in length 

Lead pH 6.5

0.15 mg/L±10%

0.010 mg/L

99.3%

99.3%

Lead pH 8.5

0.15 mg/L±10%

0.010 mg/L

94.1%

97.6%

Mercury pH 6.5 0.006 mg/L±10%

0.002 mg/L

72.0%

88.5%

Mercury pH 8.5 0.006 mg/L±10%

0.002 mg/L

95.0%

96.7%

Flow Rate=0.5 gpm (1.89 Lpm)      Capacity=400 gallons (1514 L) or 4 months
† Based on the use of microspheres or Cryptosporidium parvum oocysts.
Testing was performed under standard laboratory conditions, actual performance may vary.

Test Conditions:
Flow Rate:

0.5 gpm (1.9 Lpm)

Ph:

6.5–8.5

Temperature:

68°F +/- 5°F (20°C +/- 2.5°C)

Operating Requirements
Pressure: 

30–125 psi (2.1 – 8.6 bar)

Temperature:

40 –100°F (4.4–38°C)

Turbidity:

5 NTU Max