culligan water filter Manual Do Utilizador
Culligan knows the more informed you are about your water treatment systems, the more confident you will be
about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that
Culligan is providing this Performance Data Sheet to its customers.
about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that
Culligan is providing this Performance Data Sheet to its customers.
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual
water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water supply tested to
determine your actual water treatment needs.
water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water supply tested to
determine your actual water treatment needs.
MANUFACTURER:
Culligan International Company,
One Culligan Parkway, Northbrook, IL 60062-6209 USA
(847) 205-6000
One Culligan Parkway, Northbrook, IL 60062-6209 USA
(847) 205-6000
PRODUCT: Culligan Medallist Series
™
8” Water Softener
TESTING CONDITIONS & RESULTS:
Flow Rate: 5.9 gpm
Flow Rate: 5.9 gpm
Capacity: 18,300 grains @ 4.0 lb. salt
Pressure: 30 - 40 psi
25,100 grains @ 9.0 lb. salt
Acidity: Non-Corrosive
27,500 grains @ 12.0 lb. salt
Temperature: 68° (20°C)
pH: 7.6
SOFTENER SPECIFICATIONS:
Maximum Flow Rate: 5.9 gpm (22 Lpm)
Pressure Drop at Maximum Flow Rate: 12 psi (83 kPa)
Operating Temperature Range: 33 - 120°F (1 - 50°C)
Maximum Drain Flow Rate: 1.1 gpm (8 Lpm)
Operating Pressure Range: 20 - 125 psi (140 - 860 kPa)
Operating Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa)
Maximum Flow Rate: 5.9 gpm (22 Lpm)
Pressure Drop at Maximum Flow Rate: 12 psi (83 kPa)
Operating Temperature Range: 33 - 120°F (1 - 50°C)
Maximum Drain Flow Rate: 1.1 gpm (8 Lpm)
Operating Pressure Range: 20 - 125 psi (140 - 860 kPa)
Operating Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa)
The Culligan Medallist Series Water Softeners are tested and validated by WQA and certified by UL against
ANSI/NSF Standard 44 for the effective reduction of calcium and magnesium (hardness) along with Barium
and Radium 226/228*.
ANSI/NSF Standard 44 for the effective reduction of calcium and magnesium (hardness) along with Barium
and Radium 226/228*.
Refer to the Specifications, Familiarization and Warranty section of this Owner’s Guide for more specific
product information. To avoid contamination from improper handling and installation, your system should
only be installed and serviced by your Culligan Man. Performance will vary based on local water conditions. The
substances reduced by this system are not necessarily in your water.
product information. To avoid contamination from improper handling and installation, your system should
only be installed and serviced by your Culligan Man. Performance will vary based on local water conditions. The
substances reduced by this system are not necessarily in your water.
Culligan water softeners are designed to work with any salt of good quality, although it is recommended that
you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this softener.
you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this softener.
NOTICE: This softener is not intended to be used for treating water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
quality without adequate disinfection before or after the system.
*Verified utilizing hardness surrogate per ANSI/NSF Standard 44.
Performance Data Sheet
15
SUBSTANCE REDUCTION
USEPA SDWA
Test Influent
Test Effluent
Substance
MCL
Reduction
Concentration
Concentration
Level
Level
Barium
2 mg/L
80%
10 mg/L
2.0 mg/L
Radium 226/228
5 pCi/L
80%
25 pCi/L
5 pCI/L
Buyer Signature _____________________________________________
Date __________
Seller Signature _____________________________________________
Date __________
ANSI/NSF 44
Water Softener
81WN