Napoleon Fireplaces NZ-26 Manual Do Utilizador
W415-0676 / 03.14.08
1
$10.00
W415-0676 / 03.14.08
INSTALLATION
AND
OPERATING INSTRUCTIONS
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 4Y8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
(705)721-1212 • fax(705)722-6031 • www.napoleonfireplaces.com • ask@napoleon.on.ca
THIS FIREPLACE HAS BEEN TESTED AND LISTED BY INTERTEK TESTING SERVICES TO STANDARDS: CAN/ULC S610, UL 127, FOR ZERO CLEARANCE FIREPLACES, AND TO ULC
S639 FOR STEEL LINER ASSEMBLIES FOR SOLID FUEL BURNING MASONRY FIREPLACES. CERTIFIED UNDER USA ENVIRONMENTAL PROTECTION AGENCY (E.P.A.) JULY 1990 AND
THE OREGON DEPARTMENT OF ENVIRONMENTAL QUALITY (D.E.Q.) PARTICULATE EMISSION STANDARDS
NZ-26
INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
SAFETY INFORMATION
- This fi replace can be very hot when burning.
- Combustible materials such as fi rewood, wet clothing, etc.
placed too close can catch fi re.
- Children and pets must be kept from touching the fi replace
when it is hot.
- The chimney must be sound and free of cracks. Before install-
ing this unit, contact the local building or fi re authority and follow
their guidelines.
- Combustible materials such as fi rewood, wet clothing, etc.
placed too close can catch fi re.
- Children and pets must be kept from touching the fi replace
when it is hot.
- The chimney must be sound and free of cracks. Before install-
ing this unit, contact the local building or fi re authority and follow
their guidelines.
- Operate only with the door tightly closed.
- Burn wood behind the log retainer directly on the fi rebricks.
- Do not use an elevated grate or otherwise raise the fi re.
- This fi replace is designed to burn natural wood only. Higher
effi ciencies and lower emissions generally result when burning
air dried seasoned hardwoods, as compared to softwoods or to
green or freshly cut hardwoods.
- Do not start a fi re with chemicals or fl uids such as gasoline,
engine oil, etc.
- Do not burn treated wood, coal, charcoal, colored paper, card-
board, solvents or garbage.
- Do not let the fi replace become hot enough for any part to
glow red.
- Burn wood behind the log retainer directly on the fi rebricks.
- Do not use an elevated grate or otherwise raise the fi re.
- This fi replace is designed to burn natural wood only. Higher
effi ciencies and lower emissions generally result when burning
air dried seasoned hardwoods, as compared to softwoods or to
green or freshly cut hardwoods.
- Do not start a fi re with chemicals or fl uids such as gasoline,
engine oil, etc.
- Do not burn treated wood, coal, charcoal, colored paper, card-
board, solvents or garbage.
- Do not let the fi replace become hot enough for any part to
glow red.
If the information in these instructions is not followed
exactly, a fi re or explosion may result causing property
damage, personal injury or death.
exactly, a fi re or explosion may result causing property
damage, personal injury or death.
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage, bodily
injury or even death. Please read entire manual before you
install and use your fi replace.
maintenance can cause injury or property damage, bodily
injury or even death. Please read entire manual before you
install and use your fi replace.
This fi replace has not been tested with an unvented gas
log set. To reduce risk of fi re or injury, do not install an
unvented gas log set into the fi replace.
log set. To reduce risk of fi re or injury, do not install an
unvented gas log set into the fi replace.
!
WARNING