Kenwood TS-570S TS-570D Manual Do Utilizador

45

You can recall a Quick memory channel, only when
using VFO frequencies for both transmitting and
receiving.

1 Press QUICK MEMO [MR].

•

The current memory channel number appears.

•

If there is no data stored in any Quick memory
channel, then this step will not access Quick
memory.

2 Turn the MULTI/CH control to select a Quick

memory channel (1 to 5).

•

You cannot change memory channels while
transmitting.

3 To exit, press QUICK MEMO [MR] again.

  Memory channels cannot be changed while using the TF-SET

function.

After recalling a Quick memory channel, you can
temporarily change the data without overwriting the
contents of the channel.  You can change the frequency
even when you select OFF in Menu No. 08.

1 Press QUICK MEMO [MR].

2 Turn the MULTI/CH control to select a Quick

memory channel (1 to 5).

3 Change the frequencies and associated data.

4 To store the changed data in Quick memory, press

QUICK MEMO [M.IN].

This action stores the new data in the current
channel and bumps the old frequency to the next
higher Quick memory channel.

5 To exit, press QUICK MEMO [MR] again.

  Memory channel data can also be changed while using the

TF-SET function.

➡  VFO TRANSFER

This function copies the contents of the memory
channel that you recalled, to the VFO.

1 Recall a Quick memory channel.

2 Press [M>VFO].

   Pressing 

 after temporarily changing the recalled

data copies the new data to the VFO.