Kenwood TH-D7A Manual Do Utilizador
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
15
?
!
’
.
,
–
/
&
#
(
)
<
>
;
:
"
@
KEYPAD DIRECT ENTRY
The keypad allows you to make various entries
depending on which mode the transceiver is in.
depending on which mode the transceiver is in.
In VFO or Memory Recall mode, use the keypad to
select a frequency {page 45} or memory channel number
{page 28}. Press [ENT] first.
select a frequency {page 45} or memory channel number
{page 28}. Press [ENT] first.
In Menu mode, use the keypad to select a menu item.
For example, pressing [1], [4], [1] in sequence selects
Menu 1–4–1 (DATA BAND).
For example, pressing [1], [4], [1] in sequence selects
Menu 1–4–1 (DATA BAND).
To manually send a DTMF number, press and hold the
PTT switch, then press the keys on the keypad
{page 41}.
PTT switch, then press the keys on the keypad
{page 41}.
You can also use the keypad to program a memory
channel name {pages 29 and 42}, Power-ON message
{page 50}, or other character strings. For example, each
press of [TNC] switches entry as A, B, C, a, b, c, then 2.
Press [DUAL] to switch 0 and space. Press [ENT] to
switch among the special ASCII characters.
channel name {pages 29 and 42}, Power-ON message
{page 50}, or other character strings. For example, each
press of [TNC] switches entry as A, B, C, a, b, c, then 2.
Press [DUAL] to switch 0 and space. Press [ENT] to
switch among the special ASCII characters.
The selectable special characters are listed below:
Note: Pressing [UP]/ [DWN] allows you to select more special ASCII
characters than above.
characters than above.
TH-D7 E 10 Getting Acquainted
98.12.4, 0:10 PM
15