Kenwood TK-5410 Manual Do Utilizador

3

 ■  Manual Dialing (K2/K3/K5/K6/K7 models only)

1  Press the key programmed as Autodial.

•  The last called unit appears on the display.
•  Press the 

A key to switch the display between the unit 

name and the list number.

2  Press and hold the A key to enter Store & Send mode.
3  Enter your desired number using the DTMF keys.

•  Alternatively, you can select a digit by using the 

Side 1 

and 

Side 2 keys or by rotating the selector knob, and then 

set the selected digit by pressing the 

D> key.  Repeat this 

process to enter the entire number.

 4  Press the PTT switch to make the call.

•  Alternatively, you can press the 

<C key to page the 

selected unit, rather than making a call.

■

1  Press the key programmed as Autodial.

•  The last called unit appears on the display.
•  Press the 

A key to switch the display between the unit 

name and the list number.

2  Press the Side 2 and Side 3 keys to select your desired 

list number.

3  Press the PTT switch to make the call.

•  Alternatively, you can press the 

<C key to page the 

selected unit, rather than making a call.