Kenwood TK-5410 Manual Do Utilizador

Your transceiver operations vary according to the functions 

that your dealer has programmed onto the transceiver keys.  

Following is  brief overview of the programmable functions.  

Refer to those functions which have been programmed onto 

your transceiver.

•  2-tone (2TN) <TK-5210/ TK-5310 only> 

Press this key to display the list of 2-tone codes that has 

been pre-stored in your transceiver memory.  While viewing 

the 2-tone list, press the 

Side 2 and Side 3 keys to select 

your desired code, then press the 

PTT switch to make the 

call.

•  Autodial (AD) 

Refer to “a

utodial

” on page 33.

•  AUX (AUX) 

Press this key to toggle the auxiliary port ON and OFF.  

When toggled on, the optional feature connected to the 

auxiliary port will be activated, and on K2/K3/K/K/K7 

model transceivers, the   icon will appear on the display.

•  Battery Status (BAT) <TK-5210/ TK-5310 only> 

Press this key to view the battery power status.  Battery 

status is represented by the number of times the LED 

indicator flashes red.  Five flashes represents high power, 

 represents medium power, 3 represents low power, and 

2 represents very low power.  If the LED flashes red only 

 time, recharge or replace your battery pack immediately.  

When the Low Battery Warning function is active {page 2} 

and the battery power is low, this key will not operate.

•  Call Response (RES) 

Press this key to respond to a private call. When an 

Individual Call is received, the Alert tone stops.

•  Channel Down (CHt) 

Press this key to decrease the channel number {page }.