Kenwood TK-3180 Manual Do Utilizador
16
BASIC OPERATIONS
O
VERVIEW
Your dealer can program your transceiver with Conventional,
Voting, Voting with Signaling, and Free Channel Call zones.
The transceiver can handle up to 128 zones with up to 250
channels in each zone and a total combined maximum of 512
channels. Zones, channels, and their functions are
programmed by your dealer.
Voting, Voting with Signaling, and Free Channel Call zones.
The transceiver can handle up to 128 zones with up to 250
channels in each zone and a total combined maximum of 512
channels. Zones, channels, and their functions are
programmed by your dealer.
S
WITCHING
P
OWER
ON/ OFF
Turn the Power switch/ Volume control clockwise to switch
the transceiver ON.
the transceiver ON.
•
A beep sounds and the display momentarily lights up.
•
If the Transceiver Password function is programmed, “
”
appears on the display. You must enter the password to unlock
the transceiver. Refer to “Transceiver Password”, below.
the transceiver. Refer to “Transceiver Password”, below.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
switch the transceiver OFF.
■
T
RANSCEIVER
P
ASSWORD
To enter the password using the DTMF keypad:
1
Press the DTMF keys corresponding to the password
digits.
digits.
•
Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
Press and hold the A or # key to delete all entered
characters.
2
Press the S or
key to confirm the password.
•
If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
and the transceiver remains locked.