Kenwood TK-3180 Manual Do Utilizador

27

■

An alert tone will sound, the transceiver will automatically
enter Selcall Mode, and the calling station’s ID will appear
when a Selcall is received.

To respond to the call, press the PTT switch and speak
into the microphone.

■

An ID code is a combination of a 3-digit Fleet number and
a 4-digit ID number.  Each transceiver must have its own
Fleet and ID number.

•

Enter a Fleet number (100 ~ 349) to make a group call.

•

Enter an ID number (1000 ~ 4999) to make an individual call
in your fleet.

•

Enter a Fleet number make a call to all units in the selected
fleet (Interfleet call).

•

Select “ALL” Fleet and enter an ID number to make a call to
the selected ID in all fleets (Supervisor call).

•

Select “ALL” Fleet and “ALL” ID to make a call to all units
(Broadcast call).

Note:  The ID range may be limited by programming.

You can send and receive 2-digit Status messages which may
be decided in your talk group.  Messages can contain up to 16
alphanumeric characters.  Status messages range from 10 to
99 (80 ~ 99 are reserved for special messages).

A maximum of 15 received messages can be stored in the
Queue memory of your transceiver.  These saved messages can
be reviewed after reception.  Depending on your dealer settings,
when the Queue memory is full, either the oldest message will be
erased when a new message is received or the new message
will not be stored in the Queue memory.  The   icon lights when
a message is stored in the Queue memory.