Kenwood KIV-BT901 Manual Do Utilizador
Accessory of KIV-BT901
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 7).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the cable up to the unit with it secured at
several positions using tape or the like.
Fix a cable with a commercial
item of tape.
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory 7
⁄
• Install the microphone as far away as possible from the cell-
phone.
82
|
KIV-BT901/ KIV-701
Installation/Removing the Unit
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
some settings made on this unit.
!
• Cannot set up the subwoofer.
• No output from the subwoofer.
• Cannot set up the subwoofer position of Manual
position setting.
▲
• The Dual zone function is enabled.
• In the speaker select option, None is selected for
the subwoofer.
!
• Cannot set up the equalizer.
• Cannot set up the Bass Boost.
• Cannot set up the Highway sound.
• Cannot set up the Supreme.
• Cannot set up the Position control.
▲
▲
• The Dual zone function is enabled.
• The DSP function is disabled.
“DSP Set” of
• In the speaker select option, None is selected for
the rear speakers.
!
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear speakers.
▲
▲
The Dual zone function is disabled.
!
• Cannot set up Display.
▲
is not
turned off.
!
• Cannot switch to USB/iPod or Internal Memory
source.
▲
• The Dual zone function is set to USB/iPod or
Internal Memory.
!
The number of songs contained in “Songs”
category of this unit is different from that
contained in “Songs” category of iPod.
▲
▲
Podcast files are not counted in this unit as this unit
does not support the playback of podcast files.