Kenwood KRF-V5300D Manual Do Utilizador
38
KRF-V5300D
Specifications
AUDIO section
Rated output power during STEREO operation
(63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω) .............100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... 120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .............. 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ............... 120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
Total harmonic distortion .............................0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
CD/DVD .....................................20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .............. 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ............... 120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
Total harmonic distortion .............................0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
CD/DVD .....................................20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD
..............................................................................100
dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 40 kΩ
AV AUX ................................................................ 550 mV / 50 kΩ
DVD/6CH INPUT ................................................. 550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 Ω
PRE OUT (SUBWOOFER) ........................................ 1.5 V / 1.5 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 40 kΩ
AV AUX ................................................................ 550 mV / 50 kΩ
DVD/6CH INPUT ................................................. 550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 Ω
PRE OUT (SUBWOOFER) ........................................ 1.5 V / 1.5 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency .................32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / wave length
Optical ......................... –15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ...............................................................0.5 Vp-p / 75 Ω
Input level / wave length
Optical ......................... –15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ...............................................................0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / impedance
VIDEO (composite) ..............................................1 Vp-p / 75 Ω
VIDEO outputs / impedance
VIDEO (composite) ..............................................1 Vp-p / 75 Ω
COMPONENT VIDEO inputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
COMPONENT VIDEO outputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range .......................... 87.5 MHz – 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .................. 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO .................................................... 0.2% (71.2 dBf input)
STEREO .................................................. 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ............................ 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ........................... 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ............................................36 dB
Selectivity (DIN ±300 kHz) .................................................64 dB
Frequency response (30 Hz – 15 kHz) .............. +0.5 dB, –3.0 dB
Usable sensitivity (DIN at 75 Ω)
MONO .................. 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO .................................................... 0.2% (71.2 dBf input)
STEREO .................................................. 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ............................ 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ........................... 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ............................................36 dB
Selectivity (DIN ±300 kHz) .................................................64 dB
Frequency response (30 Hz – 15 kHz) .............. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ............................. 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) .... 16 μV / (600 μV/m)
Signal to noise ratio (30% mod.)
Usable sensitivity (30% mod., S/N 20 dB) .... 16 μV / (600 μV/m)
Signal to noise ratio (30% mod.)
...................................................... 50 dB (60 dBμV EMF input)
General
Power consumption ........................................................... 250 W
Standby power consumption ............................. less than 0.6 W
Dimensions ...............................................W: 440 mm (17-5/16")
Standby power consumption ............................. less than 0.6 W
Dimensions ...............................................W: 440 mm (17-5/16")
....................................................................H: 159 mm (6-1/4")
............................................................... D: 338 mm (13-5/16")
............................................................... D: 338 mm (13-5/16")
Weight (net) ......................................................... 8.1 kg (17.9 lb)
Notes:
1. Kenwood follows a policy of continuous advancements in
1. Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).
B60-5738-00_00.indd 38
B60-5738-00_00.indd 38
08.4.23 11:39:33 AM
08.4.23 11:39:33 AM