Kenwood KIV-BT901 Manual Do Utilizador

18   |   Quick Start Guide

Bend the tabs of the mounting sleeve 
with a screwdriver or similar tool and 
attach it in place.

⁄

•  Make sure that the unit is installed 

securely in place. If the unit is unstable, it 
may malfunction (for example, the sound 
may skip).

1.  Refer to the section <Removing the hard 

rubber frame> and then remove the 
hard rubber frame.

2.  Align the holes in the unit (two locations 

on each side) with the vehicle mounting 
bracket and secure the unit with the 
accessory screws.

8 mm
 MAX.

ø5mm

ø5mm

8mm
 MAX.

T

N

T

N

T/N

T: Toyota cars
N: Nissan cars

Accessory 

5...for Nissan car

Accessory 

6...for Toyota car

5

6

1.  Engage the catch pins on the removal 

tool and remove the two locks on the 
upper level.
Lift up and pull the frame forward as 
shown in the figure.

Catch

Lock

Removal tool (Accessory 

2

)

2.  When the upper level is removed, 

remove the lower two locations.

⁄

•  The frame can be removed from the 

bottom side in the same manner.

1.  Refer to the section <Removing the hard 

rubber frame> and then remove the 
hard rubber frame.

2.  Insert the two removal tools deeply into 

the slots on each side, as shown.

3.  Lower the removal tool toward the 

bottom, and pull out the unit halfway 
while pressing towards the inside.

Accessory 

2

¤

•  Be careful to avoid injury from the catch 

pins on the removal tool.

4.  Pull the unit all the way out with your 

hands, being careful not to drop it.

B59-2071-00_01_Q-K.indb   18

B59-2071-00_01_Q-K.indb   18

11/03/22   10:00

11/03/22   10:00