Kenwood dvf-3300 Manual Do Utilizador

Select the language you prefer for the audio Track (disc
audio), subtitles, and the disc menu

Refers to the original language in which the

disc was recorded.

To select another language, press numeric keys

then ENTER key to enter the corresponding digit num-
ber according to the language code list in the reference
chapter. If You enter the wrong Language code, press
CLEAR key.

¡

4:3: Select when a standard 4:3 TV is connected.

16:9: Select when a 16:9 wide TV is connected.

Display Mode setting works only when the TV Aspect
mode is set to "4:3".

Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.

Panscan: Automatically displays the wide Picture on the
entire screen and cuts off the portions that do not fit.

If you are using the COMPONENT VIDEO jacks, but are
connecting the DVD Player to a standard (analog) televi-
sion, set Progressive Scan to Off.
If you are using the COMPONENT VIDEO jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.

Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan com-
patible TV or monitor. If you set Progressive Scan to On
in error, you must reset the unit.

1Press 7 (stop) key to stop any disc that is playing.
2Press 7 (stop) key again for more than 5 seconds.

The video output will be restored to the standard setting,
and a picture will once again be visible on a conventional
analog TV or monitor.

Set the player's TV Output Select options according to
the TV connection type.

RGB: When your TV is connected with the SCART  jack.

: When your TV is connected with the COMPO-

NENT VIDEO  jacks on the DVD player.

Note

Note

*5634/16-21/EN

06.3.24, 3:27 PM

17